Big step forward in installation of CRYRING ion storage ring

First turn in FAIR’s first ring

FAIR's first ring: The CRYRING (Photo: Gaby Otto)

Substantial progress has been made in the construction of the CRYRING ion storage ring. During this year, all of the ring’s segments have been installed and aligned, and all of the magnets are now in their final positions and fully wired. An ion beam recently made its first turn — its first complete circuit through the entire ring. The CRYRING is a very successful ion storage ring. It was used in Stockholm for many years, where it enabled research to make considerable progress in nuclear and molecular physics. The ring was transferred to Darmstadt in 2013 as a Swedish non-cash contribution to the FAIR program. The ring has been modernized and adapted to meet FAIR standards here, and was connected to the existing Experimental Storage Ring (ESR) at GSI in a project titled CRYRING@ESR. As a result, the two rings are now integrated in a single facility.


The local accelerator that enables the ring to run independently has now been completed, as has the beamline that extends from the ESR to the CRYRING. Moreover, both of these systems have successfully sent ion beams to the CRYRING’s first diagnostic stations. The commissioning of the ring began in the summer of 2016. In the first step of this process, a group of researchers from the GSI accelerator team, the GSI research department for atomic physics, and the SPARC experiment collaboration successfully tested the beam transport line from GSI’s ESR to the first FAIR storage ring, the CRYRING. During the previous beam time period at GSI, scientists extracted completely ionized carbon ions (C6+ ions) from the ESR. They then channeled these particles to the first diagnostic station at the CRYRING. The test showed that the adjusted beamline from the ESR to Cave B (the location of the CRYRING) and the new septum magnet in the CRYRING are fully functional. The researchers also tested the beam diagnosis equipment and the FAIR-standard control hardware and software in actual beam operation.


A second beam time period took place in October/November. During this phase, the local source supplied a beam of hydrogen gas ions (H2+) that was propelled into the ring at 300 keV/u. The diagnostic systems detected this beam after one turn in the ring. This brought the first turn to a successful conclusion and demonstrated that all of the key elements work properly.


In the next step, the researchers will prepare the necessary ultra-high vacuum. The remaining ring installations — the electron cooler, in particular — will be put into operation next year. When the GSI accelerators recommence operations in 2018, the CRYRING will be able to carry out its first experiments with slow highly charged ions. In cooperation with other FAIR collaborations, the SPARC experiment collaboration is preparing many new experiments that use slow highly charged ions to investigate processes in atoms and nuclei as well as conduct research in biomolecular physics and the materials sciences.


Delivery of CRYRING to Darmstadt in 2013


First Beam Transport from existing facility to CRYRING (8/2016)


More about CRYRING

To top

(c) 2017 FAIR
  •  Home|
  • Contact